未命名文件

............................................................................................................................................... >> Weighing Indicator

HB-8260

HB-SDJB4/8

HB-8211

HB-8212

HB-8212X1

HB-8215/HB-8216(A/B)

HB-8218

HB-8220

>> HB-8212x1 ........................................ BATCHING CONTROLLER
Store up to 100 items setpoint by individual code no. Multi-function, batching control for dynamic weighing systems and process weighing control applications.
Flexible Operation - Versatile Control Programs are Built in Software Module The-HB-8212 x 1 is designed for flexible operation. They may be used for normal batching or loss in weighing batching. Both may be operated in either the fully automatic mode or user programmed mode. Fully automatic mode allows the batching operation to be started and completed automatically without the intervention or assistance of an operator.
User programmed mode allows the operator to have some control of the batching process, such as manually adding ingredients during the operation, or manually starting a new batch. In either case, the programmability of the HB-8212x1 allows the operator to enter settings that adjust the unit for almost any environmental factor. Additionally, auto zero maintenance automatic free fall compensation, and the comparator inhibitor function.

>> Setpoint Memories

Up to 100 coded sets of setpoint values can be stored into memory, and easily recalled from the front panel, personal computer (via, serial interface), or PLC.
The 100 coded memory information blocks (00 to 99).

Contain:

Final Weight
Free Fall
Preliminary
Over and Under Weighing

Technical Specifications:

	MODEL NO	HB-8212x1
INPUT AND A/D CONVERSION	Input sensitivity	0.6 V/D~120 V/D
	Zero adj. Range	0mV to 30 mV
	Loadcell excitation	12VDC, 280mA (Voltage sensing)
	Input impedance	10M(Min)
	A/D conversion method
	A/D resolution	1,000,000 Counts
	A/D conversion rate	100 times per second
DIGITAL SECTION	Weight display	13mm, 7digits high intensity cobalt-blue fluorescent tube
	Under zero Indication	Negative "-" sign
	Over Load Indication	Input signal > 36mV "------"
	Annunciators	Center of ZERO, POWER, TARE, GROSS, NET, COUNT, STABLE, FUNC. * In Function Setting
	Switches	0-9 Numeral key, ZERO, TARE, GROSS/NET, PRINT, WT/CN, FUNC. * In Function Setting
	Digital set-up parameters	Motion detection... 1.0D/1 sec., 2.0D/1 sec., 3.0D/1sec., 1D/0.5sec 2D/0.5sec., 3D/0.5sec, 4D/0.5sec., 6D/0.5sec 9D/0.5sec. Zero track... No zero tracking, 0.5D/2sec., 0.5D/1sec., 1.0D/2sec 1.0D/1sec., 1.5D/2sec., 1.5D/1sec.,2.0D/2sec., 2.0D/1sec., 3.0D/2sec. Decimal point... None or 1,2,3 or 4 decimal places Count by ... 1,2,5,10,20,50 Max. capacities... 10,000 counts x min. increment Digital filter... None or 2,4,6,8,16,32 time of average Zero range... 2%, 5%, 25%, 100% of F.S Conversion rate... 1/sec., 5/sec., 10/sec., 20/sec. ...etc Unit... kg, t, g, lb, oz
	Calibration (F.D.A.C)	zero & span full digital calibration
	Non-linearity	0.01% of full scale
GENERAL	Temp. coefficient	zero... 0.2 V RTI span... 15ppm/C of reading
	Real panel	load cell input... 7 pin industrial circular connector ext. control... 9 pin D-type connector (Zero, Tare, Gross/ Net, Print, WT/CN, Sensor Input)
	Power source (factory preset)	110, 220VAC 10% ,50/60HZ
	Net weight	2.5KG
	Operating Temperature	-10C to + 40C (+14F to + 104F)
	Operating Humidity	Max. 90% RH (Non-condensing)
	Physical dimensions	202 (W) x 105(H) x 152(D) m/m without load cell connector 202 (W) x 105(H) x 220(D) m/m with load cell connector