............................................................................................................................................... >> Weighing Indicator

HB-8260

HB-SDJB4/8
HB-8211
 HB-8212
HB-8212X1
HB-8215/HB-8216(A/B)
HB-8218
HB-8220

>> HB-8220 ........................................ Truck Scales
The HB-8220 TSC is a humanity and intelligence modern weighing control system and management
Modern industrial operations demand fast, efficient management of Data. The HB-8220TSC Truck Scales System Controller fulfill this need by giving weighing system operators the tools they need for trouble free control of weighing information, and a wide range of functions to allow the system to be tied into existing data processing facilities.
The HB-8220TSC is a humanity and intelligence design.
Which has all the performance, features and functions you need for a fast, modem weighing control system and management. Up to 500 weighing operations can be stored daily, then printed .in a detailed report such as, total volume weighed, classify systematically by particular vehicle, customer and material code. And detail of every vehicle weighed data.
Both of printer port, it can be connected one or two printer for printed out all of the weighted data and daily report.
The HB-8220TSC is the no-compromise choice for your weighing system.
Features:
  • 1/10,000 Display resolution, internal resolution of 1/130,000.
  • Humanize design. Easy, simple operation. The HB-8220TSC is designed with complete system operations from one simple key.
  • The HB-8220TSC is designed with interactive indication where operator is asked for required data and error messages indication.
  • System can be inspected, amended or clear all of the stored in memory data in on line.
  • Both of centronic type (parallel 8 bits, TTL-LEVER) printer port.
    Easy to interface impact dot matrix ticket printer and roll tape printer.
  • Reports by both weighing operations per day, and classify, systematically by material code, I.D No. (truck no.), customer code.
  • Memory holds up to 500 weighing operations per day.
  • 100 Tare weights can be preset and stored in memory by I.D. number.
  • Up to 100 weighed tare or gross values input through memory keypad. That can be stored in the memory of the HB-8220TSC. User selectable ID numbers are assigned to each value for later recall.
  • Full digital auto calibration ( F.D.A.C ) for easy calibration. Zero and span can be set from the front of panel.
  • Full digital set up parameters ( F.D.S.U ) for easy set wide range of functions, consist of resolution, minimum division, zero tracking, motion detector, decimal point.
  • Complete RFI protection for use in electrically noisy environments.
  • RS-232C communication serial interface available to connect computer, printers or external display.
  • Watchdog circuitry monitors the CPU and automatically resets the system for normal operation, if a software crash starts to develop.
  • Sealed keys keep out dust and moisture in industrial environments.
  • Internal rechargeable battery back-up to prevent data loss in the event of a power failure.
  • 4 points I/P, 4 points 0/P, control I/O for control single setpoint, set final WT. preliminary WT. free fall, zero band.
  • Weighing data consist of : Date:6digits, I/O bound time:6digits, I.D. No. (truck no.) : 7 digits, Material code : 8 digits, Customer code : 8 digits, serial No.: 3 digits, Weight: 7 digits (G-T-N)
  • Security pass word prevents unauthorized calibration and operation.
  • Many kinds of weighing sheet form and printing format are stored in system, you just select exactly you need from front of panel.
  • Both of centronic type (Parallel 8 bits, TTL-LEVER) printer port. Easy to interface impact dot matrix ticket printer and roll tape printer.
  • Reports by both weighing operations per day, and classify. Systematically by material code, I.D No. (truck no.), customer code.
  • Memory holds up to 600 weighing operations per day.
  • 100 Tare weights can be preset and stored in memory by LD. number.
  • Up to 100 weighed tare or gross values input through memory keypad. That can be stored in the memory of the HB-8220TSC. User selectable ID numbers are assigned to each value for later recall.
  • Full digital auto calibration (F.D.A.C) for easy calibration. Zero and span can be set from the front of panel.
  • Full digital set up parameters (F.D.S.U) for easy set wide range of functions, consist of resolution, minimum division, zero tracking, motion detector, decimal point.
Technical Specification:
HB-8220TSC
Analog Input and A/D Conversion
Input Sensitivity 1.1uV/D to 120uV/D
Zero adj. range 1mV to 30mV
Load cell excitation 12VDC, 280mA (up to 8 load cell at 350 / load cell)
Input impedance 10M (Min)
A/D Conversion rate 4 times per second
Temp. coefficient zero......(0.3uV+0.0005% of the initial zero offset voltage) / C
span............ 5ppm / C of reading
Display resolution 10,000 counts
Weight Display
Weight display 13mm, 7 digits high intensity cobalt-blue fluorescent tube
Under zero indication Negative " －" sign
Annumciatores Center of zero, Motion, Net, Gross
Over load indication Input signal > 36mV, display " － － － － － － －"
Under load indication Input signal < 1mV display " "
Digital set-up parameters Motion detection..........1.0/0.5 sec., 1.0/1 sec., 2.0/1 sec., 3.0/1 sec.
Zero track.....................No zero tracking, 1.5D/2 sec., 1.5D/1 sec., 1.0D/2 sec. 1.0D/1 sec. ..............................0.5D/2 sec., 0.5D/1 sec.
Decimal point...............None or 1, 2, 3 or 4 decimal places.
Count by .....................1,2,5,10,20,50
Max. capacities............300/400/500/600/800/1,000/1,200/1,500/2,000/2,500/3,000/4,000
.....................................5,000/6,000/8,000/10,000/12,000/15,000/20,000/25,000/30,000
.....................................40,000/50,000/60,000/80,000/100,000/120,000/150,000/200,000
.....................................250,000/300,000/400,000/500,000
Calibration (F.D.A.C.) Zero & span full digital calibration.
Non-linearity 0.01% of full scale
Graphic data display
Dot configuration 64 x 256 dots (vacuum fluorescent)
Display area 120.3 x 25.5mm
Dot pitch 0.4mm center to center
Spec. of display 16 dots/row, 8 dots/column, total: 3 row, 32 column
Character size 16 x 8 dots
Zone of error messages and indication 16 x 128 dots
General
Net weight 10kg (22 lbs)
Power source (factory preset) 110VAC, 220VAC, 240VAC
Fuse 0.5A, slow-blow
Operating Temperature -10C to 40C (14F to + 104F)
Operating Humidity Max. 95% RH (Non-condensing)
Physical dimensions 446 (W) x 215(D) x 106(H) mm
Note: Specifications may be changed for improvement without notice.

>> Physical Dimensions Outline

>> OPTION :
  • Option - 01 ...........Ticket type printer.
  • Option - 02 ...........Power supply unit for printer 110V-120V
  • Option - 03 ...........Power supply unit for printer 220V-240V
  • Option - 04 ...........RS-232 serial interface.
  • Option - 05 ...........Control I/O interface.
  • Option - 06 ...........Remote display.

HB-8260

HB-SDJB4/8
HB-8211
 HB-8212
HB-8212X1
HB-8215/HB-8216(A/B)
HB-8218
HB-8220

...................................................................................................................................>> Back

HOLBRIGHT WEIGHING SYSTEMS CD., LTD.
4F, No. 31, Lane 21 Min Chuan East Rd. Sec. 6 Nei Hu. Taipei. Taiwan R.O.C.
TEL: 886-2-8792-0786 FAX: 886-2-8791-2380
E-MAIL: hobright@ms11.hinet.net
     holbright@xuite.net
http://www.holbright.com.tw